type de compteur complet auto Coupez le dc32v; levier commencer tournevis électrique avec compteur d'alimentation
COUNTER TYPE FULL AUTO SHUT- OFF DC32V; LEVER-START ELECTRIC SCREWDRIVER WITH COUNTER POWER SUPPLY(#SP-C32HL60T/C)
Model # EA-C203L
# EA-C207L
# EA-C210L
Weight: 270g (0.59 lb)
Length: 205mm (8.1")
Power source: DC20V or 32V
Bit Type: HEX 6.35mm/ Ø4mm
Model # EA-C203L
Torque Range: 0.2-3.5 kgf-cm
(0.18-3.08 lbf-in; 0.02-0.34 N.m)
Uploaded Speed:
1000 r.p.m. (HIGH); 600 r.p.m. (LOW)
Available Screw Machine Screw Ø:
1.0-2.3mm (0.04-0.09")
Available Screw Tapping Screw Ø:
1.0-2.0 mm (0.04-0.08")
Model # EA-C207L
Torque Range: 0.5-7.0 kgf-cm
(0.44-6.16 lbf-in; 0.05-0.69 N.m)
Uploaded Speed:
1000 r.p.m. (HIGH); 600 r.p.m. (LOW)
Available Screw Machine Screw Ø:
1.4-2.6mm (0.06-0.10")
Available Screw Tapping Screw Ø:
1.4-2.3 mm (0.06-0.09")
Model # EA-C210L
Torque Range: 1.0-10 kgf-cm
(0.88-8.8 lbf-in; 0.1-0.98 N.m)
Uploaded Speed:
670 r.p.m. (HIGH); 400 r.p.m. (LOW)
Available Screw Machine Screw Ø:
1.6-3.0mm (0.06-0.12")
Available Screw Tapping Screw Ø:
1.6-2.6mm (0.06-0.10")
Features-
* Convenience design combine power supply and screw counter.
* Compatible with PLC based process control system; accurate counting on screw fastening.
* Auto leaning function built-in could judge the best setting value.
* Able to setting running speed & timing by Slow-Start function.
* Election on auto-reset retrieval or manual reset retrieval.
* Enhances the auto-identified screw fastening time mode; allow user to aim at simulating the duration of specific screw fastening.
* Displaying the number of unfinished screw counts; user can add external sensor switch to prevent operation error.
* Buzzer alert while complete afastening cycle. Internal signal for detecting screw count is also able to connect external devices.
* Capable with output and input signal; accurate calculation through the signal of sensor to prevent improper operation. Suitable for semi or full automatic production line.
